FTS Report on DOY 301

I.  The following are clock offsets, in microseconds between the clocks
at each DSN complex and each complex relative to UTC(NIST).  The offset
is a mean of readings using several GPS space vehicles in common view.


                SPC10     SPC40     SPC60     SPC40     SPC60
                MINUS     MINUS     MINUS     MINUS     MINUS
 MJD   DOY      NIST      NIST      NIST      SPC10     SPC10

54756  291     -0.413    -0.191     0.767     0.225     1.196
54757  292     -0.446    -0.186     0.766     0.259     1.212%
54758  293     -0.469    -0.171     0.763     0.294     1.247
54759  294     -0.501    -0.158     0.765     0.347     1.266%
54760  295     -0.519    -0.154     0.764     0.366     1.283%
54761  296     -0.540    -0.146     0.764     0.388     1.305%
54762  297     -0.551    -0.140     0.752     0.411     1.303%
54763  298     -0.573    -0.141     0.750     0.438     1.323%
54764  299     -0.585    -0.141     0.746     0.446     1.331%
54765  300     -0.601    -0.143     0.750     0.458     1.351%
54766  301     -0.632*   -0.125*    0.745*    0.508*    1.373*
54767  302     -0.652*   -0.119*    0.743*    0.534*    1.390*

II.  Frequency Offsets from linear least-squares fits on time-offsets
over the period (54756 to 54765):

|------------------------------|-----------|-------------|-----------|
|                              | DELTA-F/F | UNCERTAINTY | STD. DEV. |
|        MEASUREMENT           |   (E-13)  | (+/- E-13)  |  (nsec.)  |
|------------------------------|-----------|-------------|-----------|
|  SPC10 RELATIVE TO UTC(NIST) |  -2.363   |     0.12    |   9.372   |
|  SPC40 RELATIVE TO UTC(NIST) |   0.676   |    0.106    |   8.259   |
|  SPC60 RELATIVE TO UTC(NIST) |  -0.277   |    0.051    |   3.974   |
|  SPC40 RELATIVE TO SPC10     |   3.048   |    0.215    |  16.804   |
|  SPC60 RELATIVE TO SPC10     |   1.934   |    0.129    |  10.113   |
|------------------------------|-----------|-------------|-----------|

III.  Comments:
* Values derived from linear least squares extrapolation or interpolation
% There were not enough common-view SVs between SPC 60 and SPC 10, direct subtraction was used.