FTS Report on DOY 160 I. The following are clock offsets, in microseconds between the clocks at each DSN complex and each complex relative to UTC(NIST). The offset is a mean of readings using several GPS space vehicles in common view. SPC10 SPC40 SPC60 SPC40 SPC60 MINUS MINUS MINUS MINUS MINUS MJD DOY NIST NIST NIST SPC10 SPC10 56076 150 0.067 -0.136 -0.825 -0.204 -0.891 56077 151 0.061% -0.132 -0.843 -0.195% -0.903% 56078 152 0.055 -0.127 -0.860 -0.185 -0.913 56079 153 0.049 -0.125 -0.878 -0.176 -0.926 56080 154 10.321# -0.127 -0.898 -10.451# -11.221# 56081 155 10.325 -0.119 -0.914 -10.445 -11.237 56082 156 -0.082@ -0.117 -0.932 -0.033@ -0.845@ 56083 157 -0.092 -0.118 -0.954 -0.027 -0.860 56084 158 -0.101 -0.118 -0.978 -0.019 -0.877 56085 159 -0.107 -0.116 -0.996 -0.010 -0.888 56086 160 -0.116* -0.112* -1.013* -0.003* -0.904* 56087 161 -0.124* -0.109* -1.032* 0.004* -0.919* Values derived from linear least squares extrapolation or interpolation are indicated by (*) next to the time offset. II. Frequency Offsets from linear least-squares fits on time-offsets over the period from 56076 to 56085 ----------------------------------------------------------------------- | | DELTA-F/F | UNCERTAINTY | STD. DEV. | | MEASUREMENT | (E-13) | (+/- E-13) | (nsec.) | |---------------------------------|-----------|-------------|-----------| | SPC10 RELATIVE TO UTC(NIST) | -0.950 | 0.048 | 1.242 | | SPC40 RELATIVE TO UTC(NIST) | 0.250 | 0.096 | 2.479 | | SPC60 RELATIVE TO UTC(NIST) | -2.205 | 0.105 | 2.717 | | SPC40 RELATIVE TO SPC10 | 0.880 | 0.026 | 0.686 | | SPC60 RELATIVE TO SPC10 | -1.693 | 0.063 | 1.623 | ----------------------------------------------------------------------- III. Comments: % SPC 10 1 PPS generator failed DOY 151/1630 UTC. # SPC 10 MCA failed on DOY 153/2210 UTC. The Frequency Reference Distribution(FRD)failed, cutting off the 100 MHZ supply. It was restored at 2346 UTC, same day. @ SPC 10 1 PPS generator was restored DOY 156/2112 UTC. NOTES: All DSN data are from the new multichannel receivers. SPC 10 and SPC 60 offsets are commonviewed with NIST and with each other. SPC 40 offsets are all-in-viewed with NIST and with SPC 10. FTS Contacts: Connie Dang (626)305-6194 :: Linh La (626)305-6184 Page 1