FTS Report on DOY 181 I. The following are clock offsets, in microseconds between the clocks at each DSN complex and each complex relative to UTC(NIST). The offset is a mean of readings using several GPS space vehicles in common view. SPC10 SPC40 SPC60 SPC40 SPC60 MINUS MINUS MINUS MINUS MINUS MJD DOY NIST NIST NIST SPC10 SPC10 56097 171 -0.205 -0.102 -1.237 0.102 -1.031 56098 172 -0.215 -0.102 -1.256 0.112 -1.039 56099 173 -0.224 -0.103 -1.274$ 0.119 -1.050$ 56100 174 -0.234 -0.102 -1.259 0.131 -1.025 56101 175 -0.244 -0.101 -1.237 0.142 -0.993 56102 176 -0.254 -0.105 -1.219 0.148 -0.967 56103 177 -0.263 -0.104 -1.195 0.157 -0.932 56104 178 -0.276 -0.102 -1.175 0.172 -0.899 56105 179 -0.285 -0.096# -1.153 0.188# -0.866 56106 180 -0.297 -0.182 -1.131 0.114 -0.834 56107 181 -0.306* -0.133* -1.111* 0.172* -0.803* 56108 182 -0.316* -0.137* -1.089* 0.178* -0.772* Values derived from linear least squares extrapolation or interpolation are indicated by (*) next to the time offset. II. Frequency Offsets from linear least-squares fits on time-offsets over the period from 56097 to 56106 ----------------------------------------------------------------------- | | DELTA-F/F | UNCERTAINTY | STD. DEV. | | MEASUREMENT | (E-13) | (+/- E-13) | (nsec.) | |---------------------------------|-----------|-------------|-----------| | SPC10 RELATIVE TO UTC(NIST) | -1.177 | 0.013 | 1.006 | | SPC40 RELATIVE TO UTC(NIST) | -0.483 | 0.284 | 22.061 | | SPC60 RELATIVE TO UTC(NIST) | 2.464 | 0.017 | 1.341 | | SPC40 RELATIVE TO SPC10 | 0.699 | 0.277 | 21.519 | | SPC60 RELATIVE TO SPC10 | 3.686 | 0.026 | 1.998 | ----------------------------------------------------------------------- III. Comments: $ On DOY 173 (MJD 56099), SPC 60 HM2 (Symmetricom 263) frequency was adjusted by 5*E # On DOY 179 (MJD 56105), SPC 40 had some worn out parts of the FRD replaced, necessitating a resynch of the MCA. The time could be off by 100 nanoseconds. NOTES: All DSN data are from the new multichannel receivers. SPC 10 and SPC 60 offsets are commonviewed with NIST and with each other. SPC 40 offsets are all-in-viewed with NIST and with SPC 10. FTS Contacts: Connie Dang (626)305-6194 :: Linh La (626)305-6184 Page 1