********** KPT Logfile For Engine Only Run ********** *** Date: Mon Aug 8 18:22:59 2005 *** User: Conor Andrew Nixon, 301-286-6757 ***************************************************************** Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_SE_05119_08222.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050615AP_RE_04002_09011.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_PE_05119_08222.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_SK_05119_08222.bsp Insert Leap Seconds File: /cas/ancillary/ops/NAIF/lsk/naif0007.tls Insert Physical Constants File: /cas/ancillary/ops/NAIF/pck/cpck29Apr2005.tpc Insert Physical Constants File: /cas/ancillary/ops/NAIF/pck/cpck_rock_08Apr2005_merged.tpc Insert SCLK SCET File: /cas/ancillary/ops/NAIF/sclk/cas00092.tsc SPICE Successfully Opened Successfully Read BVH File: pdt_Run_4/input.bvh Successfully Read IVT File: pdt_Run_4/input.ivt Successfully Read TLF File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.tlf Successfully Read Momentum Models File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.mmf Successfully Read Mass Properties File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.mpf Successfully Read Grnd System Op Modes File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.gso Successfully Read KPT Spice Identification File: /cas/ancillary/ops/SCO/ssid/05_098_param.ssid Successfully Read Input PEF File: pdt_Run_4/temp.pef NOTE: This File Supercedes Any Events held within the Input Configuration File. Successfully Read KPT CMT File: /cas/ancillary/ops/SCO/cmt_limits/POST_PROBE_V10.cmt Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_SE_05119_08222.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050615AP_RE_04002_09011.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_PE_05119_08222.bsp Insert Spice File: /cas/ancillary/ops/NAIF/sp/050720AP_SK_05119_08222.bsp Insert Leap Seconds File: /cas/ancillary/ops/NAIF/lsk/naif0007.tls Insert Physical Constants File: /cas/ancillary/ops/NAIF/pck/cpck29Apr2005.tpc Insert Physical Constants File: /cas/ancillary/ops/NAIF/pck/cpck_rock_08Apr2005_merged.tpc Insert SCLK SCET File: /cas/ancillary/ops/NAIF/sclk/cas00092.tsc SPICE Successfully Opened Successfully Read BVH File: pdt_Run_4/input.bvh Successfully Read IVT File: pdt_Run_4/input.ivt Successfully Read TLF File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.tlf Successfully Read Momentum Models File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.mmf Successfully Read Mass Properties File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.mpf Successfully Read Grnd System Op Modes File: /cas/msspath/MSS.D11.0/sci_tools/mss_sw/pdt/Input/KPT/kpt_default.gso Successfully Read KPT Spice Identification File: /cas/ancillary/ops/SCO/ssid/05_098_param.ssid Successfully Read Input PEF File: pdt_Run_4/temp.pef NOTE: This File Supercedes Any Events held within the Input Configuration File. Successfully Read KPT CMT File: /cas/ancillary/ops/SCO/cmt_limits/POST_PROBE_V10.cmt ------------------------------ CSAS-KPT Version: V11.00 2004 ------------------------------ **** WARNING: INITIAL PRIMARY INERTIAL Vector TITAN is present in the Initial IVT, but the Vector Entry has a time interval which does NOT contain the Current Time of interest. THIS CONDITION REQUIRES FIXING IF THIS IS A REAL SEQUENCE. ************************************************************ NOTE: MANEUVER COMMANDS Cause Turning of the Spacecraft 1.125 -> 2.000 seconds following the Command Time - the times shown in this Run Log are times that the Spacecraft Actually Starts Turning. ************************************************************ ************************************************************ NOTE: CONSTRAINT MONITOR IS SELECTED FOR THIS RUN Initial CMT Dynamic Constraints: RCS Max Rates(rad/s): 1.43000000e-02 1.43000000e-02 1.43000000e-02 RCS Max Accel(rad/s/s): 1.54400000e-04 1.25500000e-04 3.29100000e-04 RWA Max Rates(rad/s): 2.45900000e-03 2.95000000e-03 4.88000000e-03 RWA Max Accel(rad/s/s): 1.34800000e-05 1.61700000e-05 2.67400000e-05 ************************************************************ ************************************************************ * * * NOTE: ALL ERRORS, REJECTED COMMANDS, WARNINGS, * * CMT VIOLATIONS, etc, MUST BE FIXED PRIOR * * TO FINAL SEQUENCE GENERATION and UPLINK * ************************************************************ Adding/Replacing Vector TITAN to the IVT at UTC Time: 2005-360T07:14:55.000 Adding/Replacing Vector TITAN_FRAME_1 to the IVT at UTC Time: 2005-360T07:39:53.000 Adding/Replacing Vector TITAN_LAT_LON_101 to the IVT at UTC Time: 2005-360T07:39:55.000 Adding/Replacing Vector TITAN_N_POLE_DIR to the IVT at UTC Time: 2005-360T07:39:57.000 PROCESSING Starting on PROFILE Command at 2084.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T07:44:44.000 ) This is Command #1 from the Event List NOTE: Primary Inertial Vector TITAN_LAT_LON_101 WILL be propagated by a ROTATE_VEC from the IVT. PROCESSING Starting on TARGET Command at 2085.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T07:44:45.000 ) This is Command #2 from the Event List PRIMARY BODY: CIRS_FP1; PRIMARY INERTIAL: TITAN_LAT_LON_101; SECONDARY BODY: POS_X; SECONDARY INERTIAL: TITAN_N_POLE_DIR; Light Time Correction: NO_COR PROCESSING Starting on OFFSET Command at 2092.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T07:44:52.000 ) This is Command #3 from the Event List QUANTIZED ANGLES: 0.000 0.000 0.000 mrad Profiled Maneuver time (seconds): 557.7354 PROCESSING Starting on 89EXE_CMD_SEQ Command at 2090.004 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T07:44:50.000 ) This is Command #4 from the Event List PROCESSING Starting on OFFSET Command at 2752.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T07:55:52.000 ) This is Command #5 from the Event List QUANTIZED ANGLES: 20.037 0.000 0.000 mrad Profiled Maneuver time (seconds): 94.3676 PROCESSING Starting on OFFSET Command at 3142.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T08:02:22.000 ) This is Command #6 from the Event List QUANTIZED ANGLES: 0.000 0.000 0.000 mrad Profiled Maneuver time (seconds): 94.3685 PROCESSING Starting on OFFSET Command at 6382.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T08:56:22.000 ) This is Command #7 from the Event List QUANTIZED ANGLES: 20.037 0.000 0.000 mrad Profiled Maneuver time (seconds): 94.3675 PROCESSING Starting on OFFSET Command at 6772.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T09:02:52.000 ) This is Command #8 from the Event List QUANTIZED ANGLES: 0.000 0.000 0.000 mrad Profiled Maneuver time (seconds): 94.3686 PROCESSING Starting on OFFSET Command at 8932.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T09:38:52.000 ) This is Command #9 from the Event List QUANTIZED ANGLES: 20.037 0.000 0.000 mrad Profiled Maneuver time (seconds): 94.3675 PROCESSING Starting on PROFILE Command at 9164.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T09:42:44.000 ) This is Command #10 from the Event List PROCESSING Starting on TARGET Command at 9165.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T09:42:45.000 ) This is Command #11 from the Event List PRIMARY BODY: ISS_NAC; PRIMARY INERTIAL: TITAN; SECONDARY BODY: NEG_X; SECONDARY INERTIAL: SUN; Light Time Correction: NO_COR PROCESSING Starting on OFFSET Command at 9172.000 Seconds Into the Simulated Maneuver Sequence. ( Spacecraft Event Time (UTC): 2005-360T09:42:52.000 ) This is Command #12 from the Event List QUANTIZED ANGLES: 0.000 0.000 0.000 mrad Profiled Maneuver time (seconds): 550.4157 Adding/Replacing Vector CASSINI to the IVT at UTC Time: 2005-360T09:50:00.000 EVENT SEQUENCE COMPLETED SUCCESSFULLY. (Save Checklist and Violations Summary Reports for more details) Created KPT Plot File: pdt_Run_4/kpt_eo.plt -----------------------------------